Mini-tec A Kit Manuel d'utilisateur

Mini Tec, LLC Honda - Mini Air Conditioning Kit

Charging: Charging the system should be performed by a Certified Air Conditioning Technician. Additional Photos:

COPYRIGHT 2006 MINI TEC, L.L.C. ALL RIGHTS RESERVED

Parts List: Evaporator/Heater with Dual-vent Face Plate, Condenser, Drier with mounting bracket and hardware, A/C Compressor with Serpentine Be

Evaporator/Heater Mounting: (Figure 1-1) Step 1: Properly position evaporator to bottom line of lower dash (Note: Align face plate with the contour of

Condenser Mounting: Mount in front of radiator using supplied hardware.

Drier Mounting: Step 1: Measure 7” from the front side of the brake hose mounting tab and mark holes to mount the drier using the mounting bracket

Compressor Plate Mounting: Remove the stock compressor plate and replace it with the supplied plate. (See Figure 3-1) Note: Put 4 ounces of Ester oil

Routing and Fitting Refrigerant Hoses: Route all refrigerant hoses so that they will not interfere with the operation of the Mini. The hoses to the co

Evacuating the System: Note: Evacuation and charging should only be performed by a Certified Air Conditioning Technician. Step 1: Evacuate the system

Wiring: